side of the road miniquad - FPV drone racing

I had a hard time to figure out a track. I only had 4 batteries on that track. This is not my best smooth try. The sun was also getting low.
I broke the gopro protective lens!
The next day I receive my banggood order of those lens. I now have 4. I should probably order more to make sure I have spares :)
You can find them here
http://bit.ly/gopro_lens_cover

My setup:
F40 2204 - 2300kv
DAL 5040 tri V2
KISS FC (New PIDs)
KISS 24A
HS1177
HAWKEYE 200mW vtx
Custom 220mm frame
Hero 3+ (1080 60fps super view)
Bonka 4S 1300





If you are a beginner, you can buy your parts and build your own. Here are some parts.

---------------- Combo kit ----------------------------------------------------------------
This is ~140$ US and you get 250 frame, 1806 motors, CC3D, 12A ESC, CC3D, 2.2A batterie, charger and 5030 props! (FREE shipping)
http://bit.ly/Banggood_combo_frame_2204_cc3d_ESC

This is ~145$ US and you get Emax 250 pure carbon frame, 2204 motors, CC3D, 12A ESC, CC3D and some carbon 6030 props!!! Not bad! (FREE shipping)
http://bit.ly/Banggood_combo_frame_1806_cc3d_ESC_batt_charger

---------------- Flight controller ----------------------------------------------------------------

CC3D flight controller
http://bit.ly/CC3D_flight_controller

AfroFlight Naze32 Acro flight controller
http://bit.ly/Naze32_flight_controller

---------------- Batteries ----------------------------------------------------------------

Nanotech 1.3A 45-90C (I really love these batteries!)
http://bit.ly/nanotech_3S_1300_45-90C

Nanotech 1.3A 25-50C (These have lower C rate but are CHEAP!!)
http://bit.ly/nanotech_3S_1300_25-50C

Nanotech 1.8A 65C-130C (This one need to be mounted on top of frame)
http://bit.ly/nanotech_3S_1800_65-130C

Turnigy 1500mAh 3S 25C
http://bit.ly/turnigy_3S_1500_25-35C

---------------- Charger ----------------------------------------------------------------
HobbyKing B6 AC/DC 50W Charger (US Plug)
http://bit.ly/B6_AC-DC_charger

---------------- Frames ----------------------------------------------------------------

250mm ZMR carbon fiber frame (~33$ US) (FREE shipping)
http://bit.ly/Banggood_ZMR_250_frame

250mm FPV frame
http://bit.ly/1GC4Jz4

---------------- Electronics ----------------------------------------------------------------

250mW Video transmitter (TS5823)
http://bit.ly/1Cz8rTM

12A ESC
http://bit.ly/1FNeSGl

---------------- Motors ----------------------------------------------------------------

Multistar 2204 Motors (Pack or 4)
http://bit.ly/1DAkioB

Turnigy 1806 Emax Motors (Pack of 4)
http://bit.ly/1FNf887

---------------- Props ----------------------------------------------------------------

Banggood Genfam 5030 black props (FREE shipping)
http://bit.ly/Banggood_Gemfan_5030_props

Genfam 5030 black props (You will need a LOT of those!)
http://bit.ly/1OqenWt

Genfam 5030 red props (Red does look good!)
http://bit.ly/1aHokA2

5030R (green) Three Blade Propeller
http://bit.ly/1I5lLD5

5030 (green) Three Blade Propeller
http://bit.ly/1yiLoQE












"Vicious" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
http://creativecommons.org/licenses/by/3.0/