#NanoLongRange Build Guide - 3D Printed DIY FPV Drone

After watching Dave_C's video about the #NanoLongRange, I decided to take the plunge and build one myself. This video outlines my experience building this 3D printed DIY drone. I have also written a blog post tutorial which you can follow along with here: https://nuxnik.com/nanolongrange-build-guide/ Table of Contents: 0:19 - Bill of Materials 1:50 - Extending Motor Wires 2:59 - Buck-Boost Converter and LC Filter 3:04 - Wiring Diagram for Buck-Boost Converter and LC Filter 5:10 - Battery Holder 6:47 - Mounting Peripherals 8:15 - Flight Controller Prep 8:52 - Wiring up Crossfire Receiver 8:59 Wiring Diagram for Crossfire Receiver 9:54 - Wiring up GPS Module 10:02 - Wiring Diagram for GPS module 11:20 - Wiring up Camera 11:27 - Wiring Diagram for Camera 12:00 - Wiring up Video Transmitter 12:08 - Wiring Diagram for VTX 14:08 - Wiring up Capacitor 15:06 - Wiring up Power Leads 17:12 - Frying my Flight Controller Board 18:28 - Power it Up! 19:45 - Configuration in BetaFlight 23:55 - PIDs and VTX Tables 24:41 - Maiden Flight 26:54 - Final Thoughts Errata: 22:43 - Tramp Protocol should be selected instead of SmartAudio Bill of Materials: 1. Eachine Nano V2 VTX - https://www.banggood.com/Eachine-NANO-V2-With-Microphone-VTX-5_8GHz-48CH-25-or-100-or-200-or-400mW-Switchable-FPV-Transmitter-Support-OSD-or-Pitmode-or-IRC-Tramp-for-RC-Drone-Tiny-whoop-p-1648509.html 2. 18650 tray - https://www.aliexpress.com/item/33053366600.html 3. Crossfire Nano RX - https://www.team-blacksheep.com/products/prod:crossfire_nano_rx 4. Caddx Ant Camera - https://www.aliexpress.com/item/4001038156871.html 5. LC filter - https://www.aliexpress.com/item/33033152718.html 6. 5V Buck-Booster - https://www.aliexpress.com/item/1005001419105670.html 7. JHEMUC Play F4 FC - https://www.aliexpress.com/item/33060180784.html 8. Happymodel 1202.5 11000KV Motors -https://www.aliexpress.com/item/4001162157212.html 9. Gemfan 3018 Propellers - https://www.aliexpress.com/item/4000838055658.html 10. Beitian BN-180 GPS module (optional) - https://www.aliexpress.com/item/4001293915460.html 11. Nylon Screws (optional) - https://www.aliexpress.com/item/4001124786995.html 12. Nylon Standoffs (optional) - https://www.aliexpress.com/item/32862529967.html VTX Table: The following VTX table is specific to the Eachine Nano VTX. If you are using a different VTX, these settings can be different. Open Betaflight and click on the CLI option and paste the following code into the input field: --- vtxtable bands 5 vtxtable channels 8 vtxtable band 1 BOSCAM_A A CUSTOM 5865 5845 5825 5805 5785 5765 5745 5725 vtxtable band 2 BOSCAM_B B CUSTOM 5733 5752 5771 5790 5809 5828 5847 5866 vtxtable band 3 BOSCAM_E E CUSTOM 5705 5685 5665 5645 5885 5905 5925 5945 vtxtable band 4 FATSHARK F CUSTOM 5740 5760 5780 5800 5820 5840 5860 5880 vtxtable band 5 RACEBAND R CUSTOM 5658 5695 5732 5769 5806 5843 5880 5917 vtxtable powerlevels 4 vtxtable powervalues 25 100 200 400 vtxtable powerlabels 25 100 200 400 save --- PIDs: The following PIDs were taken from Dave_C's Thingiverse https://www.thingiverse.com/thing:4769576 build page. In order to save them to your flight controller, click on the CLI option in Betaflight and paste the following code into the input field: --- set p_pitch = 100 set i_pitch = 50 set d_pitch = 70 set f_pitch = 125 set p_roll = 90 set i_roll = 45 set d_roll = 65 set f_roll = 125 set p_yaw = 65 set i_yaw = 20 set d_yaw = 0 set f_yaw = 125 save --- I would like to thank Dave_C for the hard work that went into his creative design. Get the files and print your own on Thingiverse - https://www.thingiverse.com/thing:4769576